Grade : B, C, E, 22
A range of highly refined transparent, inactive cutting oils with extreme pressure properties. These Cutting oils are specially developed for wide range of machining Operations. They are blended from highly refined high viscosity index mineral oils and carefully selected oiliness additives to improve the surface adherence properties.
Performance Level:
Proprietary grade
Application:
- These oils are used for machining yellow metals without fear of staining.
- Suitable for less severe classes of machining on ferrous metals and are excellent for automatic lathes, screw cutting machines etc.
- MAK NORCAM 22 has special chlorinated EP additives, and is designed as multipurpose neat cutting oil.
- MAK NORCAM E oils are recommended for use in wide range of machining operations on medium machinability metals and also for severe Operations on certain highly machinable steels and alloys.
- MAK NORCAM E are blended with a combination of specially selected extreme pressure additive which provides excellent protection over wide range of load, speed and operating temperatures. Being lighter in colour, these oils enable better visibility to the operator
| Grade Name |
K.V. cSt 40 ˚C |
Flash Point,COC, ˚C |
Saponification No. mg. KOH/g |
Sulphur |
| MAK NORCAM B |
17 |
-90 |
3.01 |
Inactive |
| MAK NORCAM C |
34.7 |
195 |
4 |
Inactive |
| MAK NORCAM E |
13.3 |
187 |
6 |
Inactive |
| MAK NORCAM 22 |
21.5 |
192 |
– |
Inactive |
